Results 1 to 2 of 2

Thread: ArtRage and Spoonflower

  1. #1
    Join Date
    Feb 2011
    Location
    Maryland
    Posts
    170

    ArtRage and Spoonflower

    Expanding rather than enlarging: creating a seam allowance on an original sewing pattern.

    Spoonflower print-on-demand fabrics (is SO MUCH FUN!) occasionally runs a design contest in which the challenge is to create a complete sewing project for printing on a single 18” x 21” piece of fabric. A winner would be someone whose idea not only clearly makes an exciting end product, but whose placement and incidental designs make the unfinished fabric a piece of art on its own.

    Showing the cutting lines around each piece to be sewn is easy in ArtRage by using stencils to expand the edges of the design. I make a stencil of the original shape and set the stencil to “guide” mode. I like using Guide Mode because I have better control: I can work with the stencil inverted as well as the original and have the same result.

    I then trace along the stencil guide with the pen set to twice the width I want as the distance between the cutting line and the pattern. It doesn't matter what color I choose because I'm creating this outline on its own layer for no other purpose than to create another stencil I'll trace on a third layer. In this example I used yellow set at 100% size. That means the “seam allowance” or distance between pattern edge and cutting line, will be equivalent to a pen width of 50%.

    I then trace the stencil of the enlarged outline with the pen set for the line width I want for the finished outline. In this case, the turquoise outline is size 12%.

    I use a bit of “smooth” in the pen settings to make sure the lines settle nicely into place; 5 or 10% depending on how iffy my original line was.

    Example shown: (part of) “make a pillow for a linguist”; WUG design adapted from 1958 illustration by Jean Berko Gleason, The Pioneer in Psycholinguistics.

    Click image for larger version. 

Name:	WUG CUTTING GUIDE.jpg 
Views:	6 
Size:	112.4 KB 
ID:	96483

  2. #2
    That is pretty neat! It's like the 'offset' feature in some programmes. Thank you for this input!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •