-
Stiffness Strife
Hello Team Artrage! I've tried searching for this issue without success, so forgive me if this has been brought up before.
The problem really revolves (I think) around the Stiffness settings of the oil brush. I quite like to effect a stippling technique, but I find that if Stiffness is set to anything other than 100%, the brush profile loses its definition and is laid down as a primitive shape without texture. It's quite a tricky issue to describe: the left hand column of stiffness_1_edit.jpg are a series of strokes (brush size at 50%) with a tiny bit of direction, so the stroke retains all its bristle information and starts correctly. To the left are simple dabs, and you'll see that this are crude and without texture or proper size dynamic. Stiffness here is at 78%.
stiffness_2_edit.jpg are the same stokes, but this time with Stiffness set to 100% - here you'll see both columns are rendering pretty much normally, with the left hand column 'dabs' being as small and textured as you'd expect.
It's strange behaviour, and screwing around with my Wacom settings doesn't seem to alter anything. Stiffness does seem to me to be the culprit, and has strange effects on brush behaviour on anything less than 100%.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules