Results 1 to 7 of 7

Thread: ArtRage 4.5.1 on linux using wine

  1. #1
    Join Date
    Feb 2010
    Location
    Amsterdam
    Posts
    56

    Thumbs up ArtRage 4.5.1 on linux using wine

    Using ubuntu studio 14.04 64bit intel duo core 3MHz 4 GB ram wine version 1.6.2
    runing ArtRage 4.5.1 64 Bit , Problem is with the installer ! The ArtRage team is working hard to solve this
    Else it runs great ,save,load,import,export all works.
    Yet to test the use of my bamboo tablet, wil update here.

  2. #2
    Join Date
    Nov 2015
    Posts
    1

    Unhappy There are still installer problems, why no love for linux

    There was still an installer problem(path variable from artrage folder structure not recognized by wine) with 4.5.9 with playonlinux/wine.

    My setup:
    - linux mint 17.2 KDE
    - playonlinux
    - wine 1.7.54
    - a preinstalled version of artrage on another pc with windows setup

    Steps needed for my config:
    - create virtual drive(64 bit, if you have it)
    - make sure windows version at least 7 or higher
    - copy the folder structure from your windows machine to your linux machine into the virtual drive into the appropriate folders
    - playonlinux, go to "configure", select the artrage virtual drive, go to misc, "Run a .exe file in this virtual drive", go to your path(should look like this: "/home/username/PlayOnLinux's virtual drives/artrage_4_virtual_drive/drive_c/Program Files/ArtRage 4/") and finally open "Artrage.exe"(64bit)
    - enter serial key
    - start drawing stuff
    - click create shortcut button in playonlinux

    To the Artrage Devs:

    - please add a structure download instead of installer package.
    - native linux port would always be appreciated.
    Last edited by eliemicb; 11-11-2015 at 10:35 PM.

  3. #3
    Join Date
    Feb 2010
    Location
    Amsterdam
    Posts
    56
    Yes the have no hurry to fix that
    @eliemicb That is the problem : - make sure windows version at least 7 or higher.
    I have no WC.

  4. #4
    Join Date
    Aug 2016
    Posts
    2
    ArtRage 4.5 works fine on Ubuntu 16.04

  5. #5
    Join Date
    Aug 2016
    Posts
    2

    Red face

    [1] Install ArtRage 4.5 on Windows 7 64bit machine. Below is installed location and folder structure
    C:\Program Files\Ambient Design\ArtRage 4\
    |_Resources
    |_AR3Thumb64.dll
    |_ArtRage 3 User Readme.rtf
    |_ArtRage 32.exe
    |_ArtRage.exe
    [2] Copy folder structure to Ubuntu 16.04 64bit (wine 1.6.2), you can copy this folder to anywhere in Ubuntu.
    I copied the "ArtRage 4" to /home/<User>/software/ folder.
    [3] Double click on ArtRage.exe, ArtRage 4.5 GUI will start, and ask for serial number.
    [4] Click on any brush, then there is no response, you have to kill the program.
    I think it is caused by "Use Multithreading" preference based on Phil's comment
    [5] Run ArtRage from command line will let you access uer menu, ArtRage GUI will response
    >cd /home/<user>/software/ArtRage4/
    >wine ./ArtRage.exe
    or >wine ./ArtRage 32.exe (ArtRage 32bit program can also run under Ubuntu 64bit)

    [6] Go to ArtRage->Edit->ArtRage Preference->Advanced Preferences->Use Multithreading, uncheck this "Use Multithreading" option. Then quit ArtRage
    [7] Double click on ArtRage.exe again, and this time no issue.

  6. #6
    Join Date
    Feb 2010
    Location
    Amsterdam
    Posts
    56
    Yes well that,s is the problem
    Install ArtRage 4.5 on Windows 7 64bit machine
    And sorry to say the artrage team is doing nothing,the could make the files available in the member section for download then it runs fine under wine.

  7. #7
    Join Date
    Feb 2010
    Location
    Amsterdam
    Posts
    56
    After all this time no response,so no way (guarantied) to run a newer artrage on linux on wine.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •