Results 1 to 10 of 13

Thread: Artrage 3 Oil Brush vs Artrage 4's

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2012
    Location
    Nagoya
    Posts
    38

    Artrage 3 Oil Brush vs Artrage 4's

    Since I upgraded to 4, I've been doing sketching and inking.. I haven't noticed until getting to the painting now, that that paintbrush tool feels quite a bit different to me.

    First off, I've noticed the paint doesn't want to blend as easily... I believe that's because it's no longer automatically rotating as it used to...
    I appreciate the realtime stylus rotation sensing, but personally I'm never going to be whipping it around like that. Is there a way I can set Art Rage 4's brush to behave like that in Art Rage 3?

    Also, if I wanted to emulate the old brush style, what should I do with rotation and stiffness?

  2. #2
    Join Date
    Nov 2013
    Posts
    1,993
    Are you able to provide any specific examples? I opened up both and tried it out, and couldn't spot any differences. It may be that you're just picking up on finer nuances than I am, but we may be looking at different things.

    It's worth checking that you're using the same settings on both. The default settings are:

    Pressure: 50%
    Thinners: 25%
    Loading: 50%

    The default Rotation and Stiffness settings should mimic the ArtRage 3 brush at 0% and 50% respectively. So that is a good setting to leave them on.

    As for rotation:

    The brush rotates according to Tilt for most people in both 3 and 4. ArtRage 4 does support barrel rotation, but if you're not actually using a stylus with this feature then that won't be an issue. If Rotation is set at 0% then you shouldn't be seeing "flopping around" unless something else is going on.

    Does your stylus support rotation? What exactly are you seeing?

    (P.S. Moving this down to the Technical section)

  3. #3
    Join Date
    Mar 2012
    Location
    Nagoya
    Posts
    38
    Thanks for your reply.

    Hm.. Let me put it this way. Can I turn off barrel rotation?

    I liked how in 3, the paint brush cursor would rotate as you painted arcs or changed direction. It realigns itself.


    In Art Rage 4, it isn't automatically doing this, and to get that same effect, I need to rotate my entire stylus. I'm using an Intuos 3 by the way.

  4. #4
    Join Date
    Oct 2007
    Location
    NC, USA
    Posts
    2,872
    Have you tried the Stylus Properties panel? If not, try this:

    1 - Select the Oil Brush tool
    2 - Open the settings panel and click on the menu tab (Point 1, in the attached image below)
    3 - Select the "Set Stylus Properties" option (Point 2), to open the "Stylus Properties" panel.
    4 - Remove the "Rotation" property, by clicking on the "X" (Point 3). You can always add it back later, if need be.
    5 - Accept the changes by clicking "OK" (Point 4).

    Click image for larger version. 

Name:	Stylus Properties.jpg 
Views:	212 
Size:	81.1 KB 
ID:	80334
    Nothing is easy to the unwilling.

  5. #5
    Join Date
    Jun 2007
    Location
    Delaware, USA
    Posts
    86

    I'm experiencing the same problem with the oil brush head.

    In ArtRage Studio Pro (3.5.5) and prior, when using the oil brush, outline mode, it rotated to match the direction of the stroke. If you made an "X" from 11 to 5, then 1 to 7 both strokes would be the same width at the widest part.

    In ArtRage 4 I cannot get the brush head to behave the same way. It is fixed. Therefore with the Aspect, Rotation and Stiffness settings at 50, 85, 50 an "X" made the same as above would result in a thick stroke from 1 to 7, and a thin stroke from 11 to 5. This brush head would be a oval shape, with the long axis running from Northeast to southwest, the short axis from Northwest to Southeast.

    All this was true whether a square or a round brush.

    I liked the way it was before because it mimicked rolling the brush barrel in your fingertips.

    I'm using a Wacom, Bamboo on a Mac, OS X.

  6. #6
    Join Date
    Oct 2007
    Location
    NC, USA
    Posts
    2,872
    The Aspect setting being anything lower than 100%, will cause the brush stroke to become thinner when drawn at certain angles. It's like writing with a calligraphy pen. The angle you hold your pen in relation to the tablet controls the angle of the brush direction. By setting the Aspect to 100%, you'll be forcing ArtRage to keep the brush held perfectly perpendicular to the canvas, so the tool should then respond (in terms of brush angle) like ArtRage 3 and lower (which, from testing it just now, is true on my end).
    Nothing is easy to the unwilling.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •