Results 1 to 10 of 32

Thread: Tutorial: Sticker Sheet and Preset Creation

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Oct 2007
    Location
    NC, USA
    Posts
    2,872

    Arrow Tutorial: Sticker Sheet and Preset Creation

    Sticker Sheet Creator and Sticker Spray Tutorial

    Step 1: Begin a new painting and (for the purpose of this tutorial) set the Width to 600 and the Height to 100 and then click on the "Canvas" window box to open the Canvas Panel. On the Canvas panel click the small light bulb tab to turn off the 3d lighting and select the "Cel" preset from the "Special" presets. Now Click "Ok" to close the Canvas panel and again to close the "New Painting" panel (which will open your new canvas so you can begin).


    Click image for larger version. 

Name:	step1.jpg 
Views:	997 
Size:	168.0 KB 
ID:	47039


    Step 2: Open the stencils panel and put two of the Rulers onto the canvas. Position one of the rulers horizontally across the bottom of your canvas so that the "0" lines up with the edge of the lower right side and extend it so that it measures just beyond the "600" pixel mark (the end of your canvas). Using the second ruler, draw a vertical line to mark off a square every 100 pixels (see image below).


    Click image for larger version. 

Name:	step2.jpg 
Views:	995 
Size:	134.3 KB 
ID:	47040


    Step 3: Create a new layer to work on (do this by going to: Tools > Layer Options > Add New Layer, or clicking on the "New" tab on the layers panel). With the new layer created, go down to your color panel and left click on the color window (the part that shows you which color you currently have selected) to bring up the color panel menu. Select the "Precise Color Picker" option to open its panel. On the Precise Color Picker panel, change the options to read:
    Hue: 0%
    Luminance: 50%
    Saturation: 100%
    Red: 255
    Green: 0
    Blue: 0
    It's important to use the pure red these options provide if you plan to use the sticker in conjunction with the Sticker Spray tool, because pure red is the starting base color for the hue options there. More on this later though... For now, be sure to click "Ok" on the Precise Color Picker panel to accept the color change.


    Click image for larger version. 

Name:	step3.jpg 
Views:	797 
Size:	99.7 KB 
ID:	47041


    Step 4: Fill in each of the six boxes of the canvas with a number (I wrote the numbers in by hand, you can feel free to use a stencil). Just be sure that each number is centered within each box.


    Click image for larger version. 

Name:	step4.jpg 
Views:	731 
Size:	50.2 KB 
ID:	47042


    Step 5: Click the menu tab located on the layer you wrote your numbers (or right click on the layer) to bring up the layers menu panel and select "Export Layer". Save the layer as .PNG file (you can give it any name you'd like, but I'm calling the one I'm making here "Tutorial").


    Click image for larger version. 

Name:	step5.jpg 
Views:	743 
Size:	116.5 KB 
ID:	47043


    *Continued in next post*
    Last edited by Someonesane; 08-02-2010 at 04:18 AM.
    Nothing is easy to the unwilling.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •