PDA

View Full Version : 2 colors



Rondo
09-17-2016, 08:25 PM
can some1 guide me back to the way of using 2 colors on the brush? i suppose that's possible?:)

Someonesane
09-17-2016, 11:24 PM
Hi Rondo,

For the tools that allow it, such as the Oil Brush, Watercolor, Palette Knife (on Flat or Edge mode), turning off the "Auto Clean" feature will allow for the pickup of residual paint on the canvas. You'll find the option located on the settings panel, if the tool allows for it.

Rondo
09-18-2016, 03:40 AM
so?of what i understand is that the colors has to be on the canvas already?i can not,lets say, make a scrap with 2 colors , use my brush to pick up these colors and use the brush on my canvas?

Someonesane
09-18-2016, 04:23 AM
If I remember right, as long as the Auto Clean option is off, it will pick up the color from both the canvas or a scrap.

HannahRage
09-18-2016, 11:08 PM
90768


Yup, Scraps are basically designed for this sort of thing. The one thing to bear in mind is that the loading of paint on the brush will affect the stroke - you're still going to get MORE of the current colour - so you might want to overload it with the other colour, or turn down loading.

Rondo
10-01-2016, 04:26 AM
double post

Rondo
10-02-2016, 01:26 PM
90768


Yup, Scraps are basically designed for this sort of thing. The one thing to bear in mind is that the loading of paint on the brush will affect the stroke - you're still going to get MORE of the current colour - so you might want to overload it with the other colour, or turn down loading.

Rondo
but what if i need more then 1 stroke? lets say i want to paint leaves with two shades of green? how do i do that? do i have to make many two color spots?I mean......ones you have run your brush through the colors? you can't do it again right? or??????

HannahRage
10-03-2016, 11:28 AM
If Autoclean is off, then your brush will retain the multiple colours for awhile, so you can make more than one stroke (how may just depends on your brush settings and how you draw).

You can click the 'back' arrow on the scraps to undo the stroke and remix it as often as needed. You only really need to add the NEW colour, that isn't on the brush already.

You can also make a few leaves and then turn them into a sticker spray instead.

E.g.

https://ambient-design.tumblr.com/post/147669757842/creating-a-new-sticker-sheet-part-1
https://ambient-design.tumblr.com/post/147670475987/creating-a-new-sticker-spray-part-2

Rondo
10-03-2016, 01:53 PM
It seems that the destruction of my lungs affect also my brain;(using this program far a while now and these obvious things seems to escape me;( thx for the info.