View Full Version : ArtRage 4.5.1 on linux using wine

08-22-2014, 02:12 AM
Using ubuntu studio 14.04 64bit intel duo core 3MHz 4 GB ram wine version 1.6.2
runing ArtRage 4.5.1 64 Bit , Problem is with the installer ! The ArtRage team is working hard to solve this :D
Else it runs great ,save,load,import,export all works.
Yet to test the use of my bamboo tablet, wil update here.

11-09-2015, 04:02 AM
There was still an installer problem(path variable from artrage folder structure not recognized by wine) with 4.5.9 with playonlinux/wine.

My setup:
- linux mint 17.2 KDE
- playonlinux
- wine 1.7.54
- a preinstalled version of artrage on another pc with windows setup

Steps needed for my config:
- create virtual drive(64 bit, if you have it)
- make sure windows version at least 7 or higher
- copy the folder structure from your windows machine to your linux machine into the virtual drive into the appropriate folders
- playonlinux, go to "configure", select the artrage virtual drive, go to misc, "Run a .exe file in this virtual drive", go to your path(should look like this: "/home/username/PlayOnLinux's virtual drives/artrage_4_virtual_drive/drive_c/Program Files/ArtRage 4/") and finally open "Artrage.exe"(64bit)
- enter serial key
- start drawing stuff
- click create shortcut button in playonlinux

To the Artrage Devs:

- please add a structure download instead of installer package.
- native linux port would always be appreciated.

11-20-2015, 04:22 AM
Yes the have no hurry to fix that :(
@eliemicb That is the problem : - make sure windows version at least 7 or higher.
I have no WC.

08-03-2016, 04:29 AM
ArtRage 4.5 works fine on Ubuntu 16.04

08-03-2016, 04:30 AM
[1] Install ArtRage 4.5 on Windows 7 64bit machine. Below is installed location and folder structure
C:\Program Files\Ambient Design\ArtRage 4\
|_ArtRage 3 User Readme.rtf
|_ArtRage 32.exe
[2] Copy folder structure to Ubuntu 16.04 64bit (wine 1.6.2), you can copy this folder to anywhere in Ubuntu.
I copied the "ArtRage 4" to /home/<User>/software/ folder.
[3] Double click on ArtRage.exe, ArtRage 4.5 GUI will start, and ask for serial number.
[4] Click on any brush, then there is no response, you have to kill the program.
I think it is caused by "Use Multithreading" preference based on Phil's comment
[5] Run ArtRage from command line will let you access uer menu, ArtRage GUI will response
>cd /home/<user>/software/ArtRage4/
>wine ./ArtRage.exe
or >wine ./ArtRage 32.exe (ArtRage 32bit program can also run under Ubuntu 64bit)

[6] Go to ArtRage->Edit->ArtRage Preference->Advanced Preferences->Use Multithreading, uncheck this "Use Multithreading" option. Then quit ArtRage
[7] Double click on ArtRage.exe again, and this time no issue.

08-11-2016, 01:38 AM
Yes well that,s is the problem
Install ArtRage 4.5 on Windows 7 64bit machine
And sorry to say the artrage team is doing nothing,the could make the files available in the member section for download then it runs fine under wine.

10-16-2017, 03:06 AM
After all this time no response,so no way (guarantied) to run a newer artrage on linux on wine.