damasocl
07-29-2008, 07:21 AM
Dibujamos a lápiz la silueta de la imagen de referencia. Capa A
Draw with a pencil the outline of the reference image. Layer A.
1. Vamos creando sucesivas capas, pero manteniendo la Layer A arriba, es decir, como si fuese la última capa creada.-
Keep Layer A on the top, ALWAYS. And continue creating other layers. Keep Layer A on top, just as if Layer A was the last layer created.
2. Redimensionamos (resize painting) la pintura: si mide 1000 x 800, la ampliamos a 2000 x 1600 (200 %).-
REsize the painting: if the dimensions are 1000 x 800, then amplify it to 2000 x 1600 (200%) En realidad es 100 por ciento, creo, no...
3. En la capa del fondo (background), esbozamos los tonos con el lápiz: Presión 80 % á 100 %. Tilt Angle: 100 %. Estos ajustes dependen de lo tonos que se le quiera dar.-
Now we'll work on the layer at the bottom. The background. Create the tonalities using the penciel, as follows: pressure: 80% to 100%, Tilt Angle: 100%. These adjustements depends on what kind of tonalitities you have in mind.
4. En la capa siguiente Layer B: damos las tonalidades de los detalles. En este caso, pétalos y ramas. Lápiz: 3, ó 4 %.- Tilt Angle: 50 % o menos.
Now we work on the next layer, say Layer B. We work on the details tonalities, i mean, the tonalities of the detalis. In this case, the details are: petals and sticks. We use in this case: Pencil: 3, or 4%.- Tilt angle: 50% or less.
5. En la siguiente capa Layer C, agregamos otros detalles de las flores, destacando la principal sobre el resto.
On the next layer, say Layer C, we add other details, in this case,the details of the flowers. We want to work on the principal flower, so it can be more destacated than the rest.
6. Volvemos a redimensionar la pintura (resize painting) a las capas B y C. Disminuimos su tamaño de 2000 x 1600, a alrededor de 500 x 400, o aún menos.
Now we resize the painting again to the layers B and C. We make them smaller, for instance from 2000 x 6000 to about 500 x 400 or less yet.
7. Sobre las capas B y C, aplicamos la espátula (knife) al 80 % / 98 %, presionando los bordes de los pétalos y de las ramas. Los colores se difuminan y ya aparece cierta textura de acuarela.
Now we'll work on layers B and C. Apply the knife , 80% - 98%, pressing the edges of the petals and the sticks. By doing this, we'll get the colours difuminated and we'll soon see a kind of aquarele texture.
8. Según el logro alcanzado, las capas B y C ya se pueden fundir en una sola.
Depending on the achivement of the overall effect, you can merge layers B and C, into a single layer.
9. Se vuelve a redimensionar la pintura, ahora a 2000 x 1600, y dibujamos los detalles con lapíz: Tilt angle 1 %, presión 90 %.-
We resize the painting once again. Now to 2000 x 1600, and draw the details with a pencil: Tilt angle 1% and pressure: 90%.
10.-Aplicamos suavemente la knife sobre estos detalles, pero con un tamaño 30 % o menos.
We apply the knife on the details, but using a measure of 30% or less.
11.- Redimensionamos nuevamente a aproximadamente 500 x 400.-
REsize the paing one more time, to 500 x 400 approximately.
12.- En la capa A: opacidad a 50% o menos.-
Layer A: oppacity to 50% or less.
13.- Fundir todas las capas.
Merge all the layers.
14.- Aplicar espátula al 100 % o algo menos, sobre toda la pintura. Ahora tenemos una textura de acuarela casi real.-
Apply the knife to 100% or a little less, all over the painting. Now we really have an aquarele texture.
Capa de fondo usando lápiz.
Layer backgorund using pencil.
Capa del fondo a lápiz y aplicación de espátula.
Layer background using pencil and applying the knife next.
Petalos y flor principal usando lápiz.
Petals and principal flower using pencil.
Pétalos y flor principal a lápiz y aplicación de espátula.
Petals and principal flower using pencil and applying the knife next.
I want to remark this: The overall effect was achieved just experimenting with the knife over the pencil.
Is important choosing carefully the roughness of the canvas.
I hope you can understand this Tutorial, but secret is: knife on pencil, when painting it´s too small.
Draw with a pencil the outline of the reference image. Layer A.
1. Vamos creando sucesivas capas, pero manteniendo la Layer A arriba, es decir, como si fuese la última capa creada.-
Keep Layer A on the top, ALWAYS. And continue creating other layers. Keep Layer A on top, just as if Layer A was the last layer created.
2. Redimensionamos (resize painting) la pintura: si mide 1000 x 800, la ampliamos a 2000 x 1600 (200 %).-
REsize the painting: if the dimensions are 1000 x 800, then amplify it to 2000 x 1600 (200%) En realidad es 100 por ciento, creo, no...
3. En la capa del fondo (background), esbozamos los tonos con el lápiz: Presión 80 % á 100 %. Tilt Angle: 100 %. Estos ajustes dependen de lo tonos que se le quiera dar.-
Now we'll work on the layer at the bottom. The background. Create the tonalities using the penciel, as follows: pressure: 80% to 100%, Tilt Angle: 100%. These adjustements depends on what kind of tonalitities you have in mind.
4. En la capa siguiente Layer B: damos las tonalidades de los detalles. En este caso, pétalos y ramas. Lápiz: 3, ó 4 %.- Tilt Angle: 50 % o menos.
Now we work on the next layer, say Layer B. We work on the details tonalities, i mean, the tonalities of the detalis. In this case, the details are: petals and sticks. We use in this case: Pencil: 3, or 4%.- Tilt angle: 50% or less.
5. En la siguiente capa Layer C, agregamos otros detalles de las flores, destacando la principal sobre el resto.
On the next layer, say Layer C, we add other details, in this case,the details of the flowers. We want to work on the principal flower, so it can be more destacated than the rest.
6. Volvemos a redimensionar la pintura (resize painting) a las capas B y C. Disminuimos su tamaño de 2000 x 1600, a alrededor de 500 x 400, o aún menos.
Now we resize the painting again to the layers B and C. We make them smaller, for instance from 2000 x 6000 to about 500 x 400 or less yet.
7. Sobre las capas B y C, aplicamos la espátula (knife) al 80 % / 98 %, presionando los bordes de los pétalos y de las ramas. Los colores se difuminan y ya aparece cierta textura de acuarela.
Now we'll work on layers B and C. Apply the knife , 80% - 98%, pressing the edges of the petals and the sticks. By doing this, we'll get the colours difuminated and we'll soon see a kind of aquarele texture.
8. Según el logro alcanzado, las capas B y C ya se pueden fundir en una sola.
Depending on the achivement of the overall effect, you can merge layers B and C, into a single layer.
9. Se vuelve a redimensionar la pintura, ahora a 2000 x 1600, y dibujamos los detalles con lapíz: Tilt angle 1 %, presión 90 %.-
We resize the painting once again. Now to 2000 x 1600, and draw the details with a pencil: Tilt angle 1% and pressure: 90%.
10.-Aplicamos suavemente la knife sobre estos detalles, pero con un tamaño 30 % o menos.
We apply the knife on the details, but using a measure of 30% or less.
11.- Redimensionamos nuevamente a aproximadamente 500 x 400.-
REsize the paing one more time, to 500 x 400 approximately.
12.- En la capa A: opacidad a 50% o menos.-
Layer A: oppacity to 50% or less.
13.- Fundir todas las capas.
Merge all the layers.
14.- Aplicar espátula al 100 % o algo menos, sobre toda la pintura. Ahora tenemos una textura de acuarela casi real.-
Apply the knife to 100% or a little less, all over the painting. Now we really have an aquarele texture.
Capa de fondo usando lápiz.
Layer backgorund using pencil.
Capa del fondo a lápiz y aplicación de espátula.
Layer background using pencil and applying the knife next.
Petalos y flor principal usando lápiz.
Petals and principal flower using pencil.
Pétalos y flor principal a lápiz y aplicación de espátula.
Petals and principal flower using pencil and applying the knife next.
I want to remark this: The overall effect was achieved just experimenting with the knife over the pencil.
Is important choosing carefully the roughness of the canvas.
I hope you can understand this Tutorial, but secret is: knife on pencil, when painting it´s too small.